This view allows you to define some of the key controller values that are emitted by the Voice.

Name

The name of the Voice.

Mute

The Mute parameter.

Damper/Hold (64)

Set this value to other than the default of “-1”, if you want to emit a Damper/Hold MIDI controller (MIDI CC 64) at the specified value on this Voice's MIDI line. This is a funny MIDI controller, with only two states; in that a value of 64 or greater activates Damper/Hold, and any value of 63 or less means to turn it off! Leave this value at the default of “-1” if you don't want Noatikl to emit any information for this MIDI controller.

Harmonic Content (71)

Set this value to other than the default of “-1”, if you want to emit a Harmonic Content MIDI controller (MIDI CC 71) at the specified value on this Voice's MIDI line. Leave this value at the default of “-1” if you don't want Noatikl to emit any information for this MIDI controller.

Reverb (91)

Set this value to other than the default of “-1”, if you want to emit a Reverb MIDI controller (MIDI CC 91) at the specified value on this Voice's MIDI line. Leave this value at the default of “-1” if you don't want Noatikl to emit any information for this MIDI controller.

Chorus (93)

Set this value to other than the default of “-1”, if you want to emit a Chorus MIDI controller (MIDI CC 93) at the specified value on this Voice's MIDI line. Leave this value at the default of “-1” if you don't want Noatikl to emit any information for this MIDI controller.

Damper Release

If you are using Damper/Hold (64), then you will find that your notes can start building-up and never decay! In which case, set the Damper Release property to “Yes”, which tells Noatikl to momentarily release the damper just before the end of every bar. This prevents build-up of notes and generally sounds wonderful.

Portamento (65)

Set this value to other than the default of “-1”, if you want to emit a Portamento MIDI controller (MIDI CC 65) at the specified value on this Voice's MIDI line. Leave this value at the default of “-1” if you don't want Noatikl to emit any information for this MIDI controller.

MIDI Channel Sharing

The default value of “Yes” means that this Voice can share its MIDI channel with other Voices. This is only considered if you have defined the MIDI Channel property for a Voice to be 0.