Partikl FX Unit: Delay

Overview

This adds interesting delay effects!

The main controls in this unit are:

Time: This parameter quickly determines the gross delay time in multiples of two. Increasing this parameter by one stop doubles the delay time, decreasing it halves it.

Decay: This determines the amplitude attenuation with each passing delay tap.

Taps: The number of "taps" in the delay system : the greater this number, the greater is the "thickness" of the delay effect.

BPM Sync: Default (non-tempo synched option) and various BPM values, e.g. BPM/4 which means generate the waveform selected in the above list at a tempo of the mix tempo (BPM)/4. This control allows for tempo-synched control of the Delay unit, for great effect.

T Mult: This parameter allows the user to fine tune the delay time in between the multiples specified by the parameter above.

Freq: Frequency (Ping Pong) is the movement across the stereo field with each passing delay tap. A high Ping-Pong frequency ensures a 'Ping-Pong' type of effect from one channel to the other. A low frequency results in a type of drift from one channel to the other. Only applies if the Delay is applied to a stereo signal pipeline.

Phase: This simply determines where in the stereo field the Ping-Pong starts. Only applies if the Delay is applied to a stereo signal pipeline.

Wet Level: Adjust this value to alter the amount of "wet" (processed) signal in the mix.

Dry Level: Adjust this value to alter the amount of "dry" (unprocessed) signal in the mix.